Eagletac d25c clicky ti plus#

Here is the D25A next to some other 1xAA lights, for size reference.įrom left to right: Thrunite T10T, EagleTac D25A Ti 2014, Zebralight SC52, 元 Illumination L10, AA Eneloop.Īnd again, next to a wider variety of lights. Visual comparison to other similar lights Warranty: Ten years performance guaranteed.Lens: Impact resistance waterwhite glass lens, anti-reflective (AR) coating on both sides, user replaceable.Dimensions: 3.4 inches (87 mm) long, 0.7 inches (17.5 mm) head diameter, 0.65 inches (17 mm) body diameter.

Eagletac d25c clicky ti plus#

Interface: Reverse clicky plus tighten/loosen head to change mode groups.

EagleTac also notes, “When using single 4.2V 14500 (protected circuit is highly recommended), middle output mode will become high output mode.” However my protected 14500 cells are an extremely tight fit due to the length. Other modes: Strobe, Strobe(Var), Flash(Hi), S.O.S (Fast), S.O.S., Becaon, Flash(Lo).Constant current regulation (non- PWM) for all output modes.Main high group (moon mode disabled) : 4 lm, 20 lm, 55 lm OTF.Main low group (moon mode enabled) : 0.5 lm (150+ hours), 7 lm (20 hours), 55 lm (2.5 hours) OTF.Output levels / modes: 3 main levels plus turbo and 7 semi-hidden blinky modes.LED: Nichia 219, B11 bin, 92 CRI, neutral white 5000K.This is what EagleTac has to say about the D25A-219’s performance: It’s basically the same as the regular D25A, but with a titanium body and a white glow-in-the-dark tailcap. The D25A (especially the titanium special edition) is considered by many to be one of the top EDC lights ever made. I ordered mine in mid-January but it seems EagleTac promised more than they could deliver and ran out of stock. This is the 2014 edition, though it’s from a later batch than the initial run. Switch to the desired startup level with head loosen, wait for one second, then tight the head, wait for one second, then repeat loose and tight for three times.The D25A Titanium (with Nichia 219B) is a special-edition light from EagleTac, made once per year. Define any output level as start-up output level for group 2 (loose head).

Toggle between three sets of output brightness level for “low” and “very low” levels – Toggle this setting starting with head loosen, turn on the light, wait for at least one second, and then repeat tight and loose for three times to enter next brightness set.Switch between output level – With the flashlight on, slightly press the switch and release (within 1s) to switch to the next output.Group 2: MAX – Strobe (Variable) – cycle.Group 1: Very low – low – med – high – Very low – low – med – high – Strobe(Constant)- Flash(Hi)- S.O.S.(Fast) – Beacon – Flash(Low) – cycle.Access output groups 1 & 2 – Tight the head to access group 2 output.Press the switch again until it clicks to switch off the light. Basic – Press on the switch button until it clicks to turn on the flashlight.Harden waterwhite glass lens with anti-reflective coating on both sideĠ.6-1 to 1 – 1.5 – 4.5 – (10 or 18 or 25) – (50 or 200 or 300) hours HAIII hard anodization aerospace aluminum Strobe(Constant)/Flash(Hi)/S.O.S.(Fast)/Beacon/Flash(Lo)